top of page

  • Hand unit weighs around 1.7lbs including battery

  • Large 3″ display touchscreen

  • Vibrating feedback lets you keep an eye on the action

  • Control frame rate, shutter angle, exposure index & more from hand unit

  • Less ports, less weight, less spaghetti

  • Super small and lightweight motors (173g)

  • Daisy-chainable via LBUS

  • Directly compatible with Arri’s Alexa Mini camera

ARRI WCU-4

  • The Tilta Nucleus-M Wireless Lens Control` System features a 1000′ transmission range, and comes with two lens drive motors with built-in wireless receivers, a FIZ hand controller, and two handgrips—one to control focus, and the other iris and zoom. The lens drive motors each feature a cine standard 0.8 MOD drive gear and two 7-pin connectors, which enables you to freely swap or interchange each motor. The motors power by daisy-chaining using the 7-pin cables, and each motor includes a 19mm rod clamp with 19 to 15mm reducing bushing.

TILTA NUCLEUS-M

The ARRI Operator Control Unit OCU-1 Basic Set provides the means for a camera operator to quickly take over and relinquish control of a WCU-4 system's focus, iris, and zoom axes. Use this compact, single-axis FIZ controller to save time while framing shots and executing challenging focus pulls.

  • Single-Axis Focus/Iris/Zoom Control

  • Requires Use of WCU-4 Wireless Control

  • Enables Operator to Assume Lens Control

  • Returns Control to Optional WCU-4

ARRI OCU-1
  • The ARRI FF-5HD Follow Focus is a complete follow focus system for professional HD camera systems. Designed specifically for lenses with a small diameter lens barrel. A longer swing arm ensures better gear positioning with HD lenses and a lower gear ratio is well suited for the smaller diameter. This is especially advantageous when working with cine lenses with smaller diameter barrels or compressed focus scales.

ARRI FF-5
  • 15mm LWS core bridge

  • Ergonomically designed conical handwheel with anti-slip grip and built-in provision for torch holster

  • Revolvr Swing Arm Cine (1:1.842) which can be mounted on either side of the core bridge

  • Industry standard 0.8-35 tooth and 0.8 – 43 tooth gears which connect to the lens ring

  • Two marking discs which are compatible with industry standard handwheels

  • Dedicated hardstop / softstop pack which are compatible with both our handwheels and move independently

REVOLVR ATOM FOLLOW 
FOCUS
  • Preston FI+Z, wireless lens and camera control system is known worldwide for its combination of precision, simplicity and ruggedness. It consists of the Hand Unit, TX, RX, 3 Motors, a Micro Force zoom control, and a variety of optional controls including wireless Focus/Iris, Zoom, and F/X unit

PRESTON FIZ MDR-3
  • Preston FI+Z, wireless lens and camera control system is known worldwide for its combination of precision, simplicity and ruggedness. It consists of the Hand Unit, TX, RX, 3 Motors, a Micro Force zoom control, and a variety of optional controls including wireless Focus/Iris, Zoom, and F/X unit

PRESTON FIZ MDR-1

  • The ARRI FF-5HD Follow Focus is a complete follow focus system for professional HD camera systems. Designed specifically for lenses with a small diameter lens barrel. A longer swing arm ensures better gear positioning with HD lenses and a lower gear ratio is well suited for the smaller diameter. This is especially advantageous when working with cine lenses with smaller diameter barrels or compressed focus scales.

ARRI FF-3

  • 0.8 Gear Drive for Cine Lenses
    Tightens by Thumbscrew Onto 15mm Rods
    Compatible Optionally with 19mm Rods
    Adjusts to Different Lens Diameters

Redrock Micro FF

  • The Arri FF-4 was designed for cameras with rotating shutters like the Arri BL, 435 and 535. It’s low profile allows it to snug-up against the camera.

ARRI FF-4
bottom of page